Airflow setting and control

For controlled ventilation

Aldes offers a wide range of dampers (balancing, isolation) and airflow control modules (VAV, MR, etc.) as well as airflow measurement devices

Discover our product ranges

19 products

Standard VAV XVA

The VAV enables precise airflow adjustment based on a signal whatever the pressure variation, to adapt the quantity of air to actual needs.

Motorised MR Max

The MR Max Motorised is an airflow regulator which ensures a stable airflow. It can be adjusted remotely to control IAQ, comfort and energy savings.

MR Modulo

The MR Modulo is an airflow regulator which ensures a stable airflow. It can be adjusted on site to control IAQ, comfort and energy savings.

MR Mono Standard

The MR Mono is an airflow regulator which ensures a stable airflow to control IAQ, comfort and energy savings in a room.

MR Mono High Pressure

The MR Mono is an airflow regulator which ensures a stable high-pressure airflow to control IAQ, comfort and energy savings in a room.

MR Max

The MR Max is an airflow regulator which ensures a stable airflow that can be adjusted up to high pressure. It can be adjusted on site to control IAQ, comfort and energy savings.

RMA

The RMA associated to an MR covers a peak air needs by switching from a minimum airflow to a maximum airflow and adapting to the conditions of the room.

TDA terminal

The TDA terminal generates even more savings and better IAQ in commercial buildings.

CRGN rectangular balancing damper

The CRGN damper balances a rectangular ducting system.

RG circular balancing damper

The RG damper balances airflow in a circular ducting system.

RG circular balancing damper with seals

The RG sealed damper balances a circular ducting system, while ensuring a very low leak rate: class D (up to D315) or C (D355 and beyond).

RGP circular balancing damper with seals

The RGP sealed damper precisely balances a circular ducting system. The sealed models also ensure a very low leak rate.

Iris balancing damper

The Iris damper finely balances a circular ducting system, while ensuring a very low leak rate (class C airtight performance).

RGE circular insulating damper

The RGE damper is used to manually balance and isolate a circular ducting system, while ensuring a very low leak rate.

RGEM motorised shut-off damper

The RGEM motorised damper uses a motor to balance and isolate a circular ducting system, while ensuring a very low leak rate.

RGE motorised and manual shut-off damper

The RGE damper uses a motor or manual operation to balance and isolate a circular ducting system, while ensuring a very low leak rate.

CRGE rectangular shut-off damper

The CRGE damper balances and isolates a rectangular ducting system.

RPM shut-off damper

The RPM will shut off a system branch as soon as it receives a command signal to do to.

Backdraft damper

In intermittent-operation ventilation systems, if the fan is stopped, the backdraft damper will prevent outside air from entering the building and the resulting energy losses.