Oblong rigid spiral ducts: CSRO
The galvanised oblong duct is a high-performance alternative to rectangular ducting, enabling high airflows in limited spaces.
Oblong Male Plug: BMO
The Oblong Male Plug seals off an oblong duct system in commercial and multi-occupancy residential buildings.
Oblong horizontal elbow: CHO 30�
The oblong horizontal 30° bend is used to change the direction of an oblong ducting system by a 30° angle in the plane of the system.
Oblong horizontal elbow: CHO 45�
The oblong horizontal 45° bend is used to change the direction of an oblong ducting system by a 45° angle in the plane of the system.
Oblong horizontal elbow: CHO 90�
The oblong horizontal 90° bend is used to change the direction of an oblong ducting system by a 90° angle in the plane of the system.
Oblong vertical elbow: CVO 30�
The Oblong vertical 30° bend is used to change the direction of an oblong ducting system by a 30° angle.
Oblong vertical elbow: CVO 45�
The Oblong vertical 45° bend is used to change the direction of an oblong ducting system by a 45° angle.
Oblong vertical elbow: CVO 90�
The Oblong vertical 90° bend is used to change the direction of an oblong ducting system by a 90° angle.
Oblong Horizontal Y-piece: CSH 90�
The oblong horizontal 90° Y-piece enables confluence of two oblong duct branches at a 90° angle from each other.
Oblong 90� spigot connector: 90� PDO
The PDO oblong 90° branch connector makes a right-angle branch on a galvanised circular duct.
Oblong 90� spigot Connector on flat section: PDOP
The PDOP oblong 90° branch connector for flat section makes a right-angle branch on a galvanised oblong or rectangular duct.
Oblong Female Connector: RFO
The RFO oblong female connector connects two galvanised oblong accessories together.
Oblong Male Connector: RMO
The RMO oblong male connector connects two galvanised oblong ducts together.
Oblong / Cylindrical Concentric Reduction: RCOC
The RCOC oblong / circular concentric reducer connects an oblong duct to a circular duct.
Oblong Concentric Reduction: RCO
The RCO oblong concentric reducer joins two galvanised ducts of different diameters together.
Oblong/Cylindrical Tangent Reduction on flat section: ROCTP
The ROCTP oblong cylindrical tangent reducer is used to connect an oblong duct with a circular duct while maintaining a linear and flat ducting without losing space underneath.
Oblong Tangent Reduction on flat duct section: ROTP
The ROTP oblong tangent reducer is used to connect oblong ducts of different diameters while maintaining a linear and flat ducting without losing space underneath.
Oblong balancing damper: RGO
The RGO oblong balancing damper is used to adjust the pressure in oblong ducting branches in commercial or multi-occupancy residential buildings.
