Flat 90° Branch Connector: PEP+seals
Airflow control
Flat 90° Branch Connector: PEP+seals
Airflow control
The PEP sealed flat 90° branch connector makes a right-angle branch on a galvanised oblong or rectangular duct.
Flat 90° Branch Connector: PEP+seals
The PEP sealed flat 90° branch connector makes a right-angle branch on a galvanised oblong or rectangular duct.
The + products
- easy and quick to install,
- aesthetic ducting.
- available in diameters from 125 to 560,
- galvanised steel as per EN 10346 ensuring uniformity of coating,
- all junctions are crimped,
- temperature range: - 30°C à + 100°C,
- resistant to ageing (> 30 years), UV and ozone,
- M0 fire certification,
- not advised for class C airtight performance.
- when installing, pay special attention to pressures losses, noise and leaks that may be generated
- prioritise the use of factory-produced sealed T-pieces,
- to slot in or remove an accessory, rotate it slightly in the duct,
- as an airtight junction is automatically provided by the ALDES seal, no need to use sealant or adhesive tape,
- for vertical installations especially, the use of self-tapping screws remains recommended,
- time savings in relation to ducting with standard accessories is in the range of 20 % (at least 15 to 30 seconds saved per junction for diameters 125 to 315, or at least 30 to 60 seconds saved for each accessory in these diameters),
- ALDES sealed accessories are specially designed to ensure easy connection / disconnection. The ALDES range offers class C airtight performance and low connection torque.
| Main material | Insulation material |
|---|---|
| Galvanised steel |
| References | Ø (mm) | Ø A (mm) |
|---|---|---|
| 11098302 - PEP GALVA Branch piece+seal - Ø 125 mm | 125 |
125 |
| 11098303 - PEP GALVA Branch piece+seal - Ø 160 mm | 160 |
160 |
| 11098304 - PEP GALVA Branch piece+seal - Ø 200 mm | 200 |
200 |
| 11098305 - PEP GALVA Branch piece+seal - Ø 250 mm | 250 |
250 |
| 11098306 - PEP GALVA Branch piece+seal - Ø 315 mm | 315 |
315 |
| 11098307 - PEP GALVA Branch piece+seal - Ø 355 mm | 355 |
355 |
| 11098308 - PEP GALVA Branch piece+seal - Ø 400 mm | 400 |
400 |
| 11098309 - PEP GALVA Branch piece+seal - Ø 500 mm | 500 |
500 |
| 11098311 - PEP GALVA Branch piece+seal - Ø 450 mm | 450 |
450 |
| 11098312 - PEP GALVA Branch piece+seal - Ø 560 mm | 560 |
560 |
| Fire protection rating |
|---|
| M0 |
