Oblong Tangent Reducer on flat duct section: ROTP
Airflow control
Oblong Tangent Reducer on flat duct section: ROTP
Airflow control
The ROTP oblong tangent reducer is used to connect oblong ducts of different diameters while maintaining a linear and flat ducting without losing space underneath.
Oblong Tangent Reducer on flat duct section: ROTP
The ROCTP oblong tangent reducer on flat section is used to connect two oblong ducts of different diameters while maintaining a linear and flat ducting without losing space underneath.
The + products
- small size for high airflow,
- good airtight performance and controlled pressure losses,
- easy to install and maintain (no inaccessible corners).
- standard dimensions (20 oblong sections),
- galvanised steel as per EN 10346 ensuring uniformity of coating,
- M0 fire certification.
- easy assembly of interlocking accessories: ducts are female, accessories are male,
- Final seal requires sealant and/or perforated strip,
- attached to duct using self-tapping screws (4 to 6 depending on diameter).
| Main material | Insulation material |
|---|---|
| Galvanised steel |
| References | H (mm) | L (mm) |
|---|---|---|
| 11064232 - ROTP GALVA - 450x100 / 360x80 | 100 |
450 |
| 11064234 - ROTP GALVA - 410x165 / 360x80 | 165 |
410 |
| 11064249 - ROTP GALVA - 515x215 / 410x165 | 215 |
515 |
| 11064254 - ROTP GALVA - 675x215 / 475x165 | 215 |
675 |
| 11064295 - ROTP GALVA - 950x320 / 645x265 | 320 |
950 |
| 11066396 - ROTP GALVA - 490x130 / 360x80 | 130 |
490 |
| Fire protection rating |
|---|
| M0 |
