45� elbow: 45� elbow with seals Connector

45� elbow: 45� elbow with seals

Connector

The sealed 45° bend is used to change the direction of a galvanised ducting system by a 45° angle while delivering class C airtight performance.
45� elbow: 45� elbow with seals
45� elbow: 45� elbow with seals
The sealed 45° bend is used to change the direction of a galvanised ducting system by a 45° angle while delivering class C airtight performance. The bends are pressed up to diameter 200, from 250 to 500 they use sectors.
45� elbow: 45� elbow with seals

The + products

  • easy and quick to install,
  • class C airtight performance,
  • aesthetic ducting.
  • available in diameters from 125 to 560,
  • galvanised steel as per EN 10346 ensuring uniformity of coating,
  • temperature range: - 30°C à + 100°C,
  • resistant to ageing (> 30 years), UV and ozone,
  • M0 fire certification,
  • class C airtight performance as per standard NF EN 12237.
  • to slot in or remove an accessory, rotate it slightly in the duct,
  • as an airtight seal is automatically provided by the ALDES seal, no need to use sealant or adhesive tape,
  • for vertical installations especially, the use of self-tapping screws remains recommended,
  • time savings in relation to ducting with standard accessories is in the range of 20 % (at least 15 to 30 seconds saved per junction for diameters 125 to 315, or at least 30 to 60 seconds saved for each accessory in these diameters),
  • ALDES sealed accessories are specially designed to ensure easy connection / disconnection. The ALDES range offers class C airtight performance and low connection torque.
Insulation material
45� elbow: 45� elbow with seals
References Ø (mm)
11098122 - GALVA 45° pressed bend+seal - Ø 125 mm

125

11098123 - GALVA 45° pressed bend+seal - Ø 160 mm

160

11098124 - GALVA 45° pressed bend+seal - Ø 200 mm

200

11098125 - GALVA 45° bend+seal - Ø 250 mm

250

11098126 - GALVA 45° bend+seal - Ø 315 mm

315

11098127 - GALVA 45° bend+seal - Ø 355 mm

355

11098128 - GALVA 45° bend+seal - Ø 400 mm

400

11098129 - GALVA 45° bend+seal - Ø 500 mm

500

11098131 - GALVA 45° bend+seal - Ø 450 mm

450

11098132 - GALVA 45° bend+seal - Ø 560 mm

560

Fire protection rating

M0

Products and accessories references

  • GALVA 45° pressed bend+seal - Ø 125 mm
    GALVA 45° pressed bend+seal - Ø 125 mm
    11098122
    22,75 (without VAT)
  • GALVA 45° pressed bend+seal - Ø 160 mm
    GALVA 45° pressed bend+seal - Ø 160 mm
    11098123
    32,74 (without VAT)
  • GALVA 45° pressed bend+seal - Ø 200 mm
    GALVA 45° pressed bend+seal - Ø 200 mm
    11098124
    37,03 (without VAT)
  • GALVA 45° bend+seal - Ø 250 mm
    GALVA 45° bend+seal - Ø 250 mm
    11098125
    44,98 (without VAT)
  • GALVA 45° bend+seal - Ø 315 mm
    GALVA 45° bend+seal - Ø 315 mm
    11098126
    85,27 (without VAT)
  • GALVA 45° bend+seal - Ø 355 mm
    GALVA 45° bend+seal - Ø 355 mm
    11098127
    89,15 (without VAT)
  • GALVA 45° bend+seal - Ø 400 mm
    GALVA 45° bend+seal - Ø 400 mm
    11098128
    105,06 (without VAT)
  • GALVA 45° bend+seal - Ø 500 mm
    GALVA 45° bend+seal - Ø 500 mm
    11098129
    168,48 (without VAT)
  • GALVA 45° bend+seal - Ø 450 mm
    GALVA 45° bend+seal - Ø 450 mm
    11098131
    129,15 (without VAT)
  • GALVA 45° bend+seal - Ø 560 mm
    GALVA 45° bend+seal - Ø 560 mm
    11098132
    249,90 (without VAT)