Smoke exhaust dampers and air inlets

Aldes air inlets and dampers are important components in a fire safety system. They open on command to extract smoke and heat, allowing fresh air into the required area.
They must therefore be sized correctly, clearly identified and marked at safety devices, and left fully unobstructed.
Protective screens protect the dampers against external aggressions (kicks, forklift trucks, hospital beds) and prevent people from falling into smoke and heat exhaust ducts.

Discover our product ranges

22 products

OPTONE� "+ Grille" 1 flap

OPTONE “+Grille” smoke control dampers are intended for commercial premises and can be used as air inlets or for smoke and heat exhaust.

OPTONE� "+ Grille" 2 flaps

OPTONE “+Grille” smoke control dampers are intended for commercial premises and can be used as air inlets or for smoke and heat exhaust.

OPTONE� "Classic" 1 flap

OPTONE “Classic” smoke control dampers are intended for commercial premises and can be used as air inlets or for smoke and heat exhaust.

OPTONE� "Classic" 2 flaps

OPTONE “Classic” smoke control dampers are intended for commercial premises and can be used as air inlets or for smoke and heat exhaust.

GFAP 007

The GFAP 007 decorative grille serves to conceal openings or smoke control dampers.

GFAP

The GFAP decorative grille serves to conceal openings or smoke control dampers.

GFE - Visible frame

The frame of the GFE grille - Visible frame offers a discreet aesthetic finish on a wall surface while concealing an opening.

GFE 007- Visible frame

The frame of the GFE 007 grille - Visible frame offers a discreet aesthetic finish on a wall surface while concealing an opening.

GFE - Edged

The concealed frame of the GFE grille - Edged offers elegant and discreet aesthetics, while covering the opening.

GFE 007 - Edged

The concealed frame of the GFE 007 grille - Edged offers elegant and discreet aesthetics while covering the opening.

GGH

The concealed frame of the GGH grille offers elegant and discreet aesthetics, while covering the smoke control damper from the floor to the ceiling.

PLAFONE

PLAFONE is a fire and smoke control tunnel damper for public access buildings, high-rises or category 3 and 4 residential buildings.

GDF transfer guillotine damper E60

The GDF damper is a guillotine smoke control damper E60 (1h) used to transfer air between a corridor and an airlock in high-rise buildings operating with solution B.

OXYTONE Panel 2012

The OXYTONE Panneau 2012 air inlet provides fresh air in case of fire, with optimised aesthetics and thermal insulation.

OXYTONE Blades 2013

The OXYTONE Lames 2013 air inlet provides fresh air in case of fire. Its motorised reset makes maintenance easier.

AIRONE casement

The AIRONE air inlet provides fresh air in case of fire, with optimised aesthetics and thermal insulation.

Parkone

The residential car park smoke and heat exhaust units control the 2-speed axial fans for ventilation, smoke and heat exhaust.

Smoke and heat exhaust - residential car park

The residential car park smoke and heat exhaust units control the 2-speed axial fans for ventilation, smoke and heat exhaust.

OPTONE�-H "+ Grille

The OPTONE-H "+ Grille” damper is used for smoke and heat exhaust on ducting in residential buildings in categories 3B or 4.

ORDONE smoke exhaust panel

The ORDONE smoke exhaust control panel is addressable and can make major savings on cables.

Manual triggering device

The manual trip device is used in a smoke and heat exhaust system in multi-occupancy housing.

Smoke detector

Smoke detector used in a smoke and heat exhaust system in multi-occupancy housing.