Male inspection connector "SMART access
Small outlet
Male inspection connector "SMART access
Small outlet
The “SMART access” male inspection connector connects two circular ducts and integrates an inspection hatch.
Male inspection connector "SMART access
The “SMART access” male inspection connector connects two galvanised ducts and integrates an inspection hatch. The “SMART access” inspection hatch simplifies observance of standard NF EN 12097 on new systems.
The + products
- easy and quick to install,
- class C airtight performance,
- aesthetic ducting.
- range available from diameter 125 to diameter 315,
-
hatch dimensions compliant with standard NF EN 12097:
- 180 x 80 mm for Ø 125 and Ø 160,
- 250 x 150 mm for Ø 200 to Ø 315.
- galvanised steel as per EN 10346 ensuring uniformity of coating,
- temperature range: - 30°C à + 100°C,
- resistant to ageing (> 30 years), UV and ozone,
- M0 fire certification,
- class C airtight performance as per standard NF EN 12237.
- to slot in or remove an accessory, rotate it slightly in the duct,
- as an airtight seal is automatically provided by the ALDES seal, no need to use sealant or adhesive tape,
- for vertical installations especially, the use of self-tapping screws remains recommended,
- time savings in relation to ducting with standard accessories is in the range of 20 % (at least 15 to 30 seconds saved per junction for diameters 125 to 315, or at least 30 to 60 seconds saved for each accessory in these diameters),
- ALDES sealed accessories are specially designed to ensure easy connection / disconnection. The ALDES range offers class C airtight performance and low connection torque.
Insulation material |
---|
References | Ø (mm) |
---|---|
11093056 - RM SMART access branch piece - Ø 125 mm | 125 |
11093057 - RM SMART access branch piece - Ø 160 mm | 160 |
11093058 - RM SMART access branch piece - Ø 200 mm | 200 |
11093059 - RM SMART access branch piece - Ø 250 mm | 250 |
11093060 - RM SMART access branch piece - Ø 315 mm | 315 |
Fire protection rating |
---|
M0 |