90� T-piece: TE 90�
The TE 90° T-piece is used to connect two ductwork branches at an angle of 90°.
45� branch connector: TO 45�
The TE 45° T-piece is used to connect two ductwork branches at an angle of 45°.
Male - Female Plug: BMF
The Male - Female Plug seals off a galvanised steel duct or accessory in commercial and multi-occupancy residential buildings.
T-piece spigot connector (CP): CP
The T-piece branch connector creates a junction and access point for the vertical collector system and the horizontal ducting.
T-piece spigot connector for air tightness readings: CPT
The CPT T-piece branch connector for air tightness readings creates a junction and access point for the vertical collector system and the horizontal ducting.
Collector storey connection (CRE): Multi-dwelling CRE
The multi-dwelling CRE storey manifold can connect two dwellings on the same storey to the same vertical riser.
Collector storey connection (CRE): Standard CRE storey collector
The CRE standard storey manifold is used to connect up to four 125 mm diameter ducts to the vertical riser.
90� Y-branch piece: CS 90�
The 90° Y-piece enables confluence of 2 galvanised duct branches at 90° from each other.
30� elbow
The 30° bend is used to change the direction of a galvanised ducting system by a 30° angle.
45� elbow
The 45° bend is used to change the direction of a galvanised ducting system by a 45° angle.
90� elbow
The 90° bend is used to change the direction of a galvanised ducting system by a 90° angle.
Circular 90� Spigot Connector: PEC 90�
The PEC circular 90° branch connector makes a right-angle branch on a galvanised circular duct.
Flat 90� Spigot Connector: PEP 90�
The PEP flat 90° branch connector makes a right-angle branch on a galvanised oblong or rectangular duct.
Circular Oblique Spigot Connector: POC 45�
The PEC circular branch connector makes a 45° angle branch on a galvanised circular duct.
Flat Oblique Spigot Connector: POP 45�
The POP angled branch connector makes a 45° angle branch on a galvanised oblong or rectangular duct.
Female connector: RF
The female connector connects two galvanised accessories together.
Male connector: RM
The male connector connects two galvanised ducts together.
Concentric Conical Reduction: RCC
The RCC joins two galvanised ducts of different diameters together.
Concentric Flat Reduction: RPC
The RPC joins two galvanised ducts of different diameters together over a minimum length.
Acoustic and Aeraulic T-piece spigot connector: CP2A
The CP2A branch connector provides a junction and accessibility to the vertical collector system and horizontal ducting, improves acoustic and aeraulic performance.
Acoustic and Aeraulic T-piece spigot connector for air tightness readings: CPT2A
The CPT2A branch connector provides a junction and accessibility to the vertical collector system and horizontal ducting, improves acoustic and aeraulic performance.
Circular Protective Screen: GPC
The GPC circular protective screen is an anti-bird screen for attachment to circular ducts.
Flat Roof Penetration Sleeve: FT
The flat roof penetration sleeve is a ducting accessory used to protect the duct as it passes through the flat roof.
Sealing flap
The sealing flap is a galvanised steel ducting accessory that ensures a leaktight seal on roof penetrations.
60� bend
