Roll of mineral wool
Thermal insulation
Roll of mineral wool
Thermal insulation
Mineral wool provides thermal insulation of indoor rigid ducting systems in commercial or multi-occupancy residential buildings.
Roll of mineral wool
The roll of mineral wool provides thermal insulation of ventilation / air handling systems using rigid ducting systems in commercial or multi-occupancy residential buildings. It prevents condensation in CMEV system ducting crossing unheated indoor spaces. The roll features a 5 cm tab on one side to ensure mechanical strength in accordance with DTU 45.2.
The + products
- M0 fire certification.
- 5 cm tab on one side to ensure mechanical strength in accordance with DTU 45.2.
- Mineral wool protected by a reinforced aluminium vapour barrier,
-
Roll available in two thickness values:
- 25 mm roll: 13.8 m2 where L x W = 12 m x 1.15 m,
- 50 mm roll: 8.63 m2 where L x W = 7.5 m x 1.15 m.
- conductivity coefficient: λ = 0.035 W/m.K (at 10 °C) and λ = 0.040 W/m.K (at 40 °C),
- M0 fire certification.
- cut the mineral wool roll to the appropriate length according to the duct dimensions,
- press the insulation against the duct,
- staple the tab,
- ensure an airtight seal using an RAA aluminium adhesive tape with a minimum width of 50 mm.
- hold all pieces together using the perforated strip.
| Insulation material |
|---|
