RGE motorised and manual shut-off damper
Damper
RGE motorised and manual shut-off damper
Damper
The RGE damper uses a motor or manual operation to balance and isolate a circular ducting system, while ensuring a very low leak rate.

RGE motorised and manual shut-off damper
The RGE damper balances airflow and isolates a circular ducting system. It features a sealed disc to minimise air leaks between upstream and of the damper in the closed position and double-lip airtight seals on each junction to minimise leaks with the rest of the system. Its top jumper enables overlaid insulation without covering the lockable handle.

The + products
- class C airtight performance as per EN 1751,
- manual or motorised operation using plate kit.
The flap of the RGE manual damper is opened and closed by rotating a handle or using a motor after a motor plate is installed. If it is closed, the airtight seal is formed by the moulded seal on the disc.
- galvanised steel,
- airtight performance upstream/downstream of disc: class 4 as per EN 1751,
- class C product airtight performance as per EN 12237,
- motor plate ordered separately,
- motor ordered separately: 4-5 N.m for RGE Ø 355 to 450 and 10 N.m for RGE Ø 500 mm,
- temperature range: 0 to 120°C.
- installed in circular ducts.
Insulation material |
---|

References | H (mm) | L (mm) | Ø (mm) | Weight (kg) |
---|---|---|---|---|
11055116 - RGE Ø355 Manual and Motorised with kit | 85 |
200 |
355 |
2,94 |
11055117 - RGE Ø400 Manual and Motorised with kit | 85 |
200 |
400 |
4 |
11055118 - RGE Ø450 Manual and Motorised with kit | 85 |
200 |
450 |
4,6 |
11055119 - RGE Ø500 Manual and Motorised with kit | 85 |
200 |
500 |
5,25 |
11055122 - MOTOR PLATE KIT FOR DIAMETERS 355 to 500 mm | 6 |
162 |
0,15 |
References | Airtightness class | Upstream/downstream airtightness class |
---|---|---|
11055116 - RGE Ø355 Manual and Motorised with kit | C |
4 |
11055117 - RGE Ø400 Manual and Motorised with kit | C |
4 |
11055118 - RGE Ø450 Manual and Motorised with kit | C |
4 |
11055119 - RGE Ø500 Manual and Motorised with kit | C |
4 |
11055122 - MOTOR PLATE KIT FOR DIAMETERS 355 to 500 mm |