BAHIA CURVE S Bath/Shower
BAHIA CURVE S Bath/Shower
The BAHIA CURVE humidity-controlled terminal for bathrooms and WC ensures sufficient and constant extraction of indoor pollution according to the humidity level in the room.
BAHIA CURVE S Bath/Shower
BAHIA CURVE S is a humidity-controlled extract terminal designed for utility rooms in individual houses, new and refurbished multi-occupancy residential housing. This terminal is the small model for airflow needs < 50 m3/h.
The + products
- easy to install,
- simple to clean,
- unique no-grille design conserves the aesthetic character of the terminal even if it is clogged.
- Roll-In seal
- single reference for battery-powered or 230 V mains power.
In a humidity-controlled CMEV system, the airflow is automatically controlled according to the humidity level in rooms and therefore based on the actual ventilation needs of the building. The BAHIA CURVE S terminal is installed in bathrooms/WC.
- humidity-controlled terminal, small size (airflow < 50 m3/h),
- versions and accessories to meet all installation needs,
- easy maintenance: control sub-assembly quick to clip on and unclip, easy to clean without being removed from the wall thanks to its removable Bahia Curve casing,
- pressure range: 80 - 160 Pa.
- BAHIA CURVE S must be installed in humid rooms or equipment rooms: bathrooms, WC, cellar, etc.
- the terminal must be located at the top of a vertical wall or on the ceiling at least 1.80 m from the floor,
- the terminal must be accessible and removable with a distance of at least 20 cm between the centre of the terminal and the adjacent walls and not glued to the duct,
- the air tightness of the terminal - duct connection must be optimal. This is achieved with O-ring seals and reinforced with a sleeve. A sheet metal sleeve is used for multi-occupancy housing (stainless steel sleeve required for a gas CMEV system). A plastic sleeve may be used for an individual house. The sleeves are slotted directly into: - a semi-rigid or rigid duct Ø 125 mm correctly shaped, a sheet metal sleeve Ø 125 mm (code 11012220),
- the terminal is slotted directly into: a sleeve, RT Flex, rigid or semi-rigid ducts. The airtight seal is created with O-ring seals and reinforced with a sleeve.
- versions with shaft D 80 mm, slots into sleeves, rigid and semi-rigid ducts.
- If cord-operated grilles are installed in the ceiling or above a piece of furniture, use a cord return system (code 11015001).
- Note: For humidity-controlled terminals with electrical controls, a 9V alkaline battery type 6LR61 is required as well as a conventional push button (code 11026011).
- Humidity-controlled terminals operate within the 80-160 Pa pressure range.
- Extract terminals must be maintained and checked at least once a year. Never connect a mechanical extractor hood to the CMEV network (article 14 of Decision of 24 March 1982),
- Before replacing an old terminal with a new one, measure the pressure and identify the type of dwelling.
| References | Type of dwelling in Hygro B | Insulation material | Type of control | Type of dwelling | Colour |
|---|---|---|---|---|---|
| 11015463 - B32 BAHIA® CURVE 5-45 - Ø 125 mm - White | Hygro B |
F3 |
White |
||
| 11015464 - B13 BAHIA® CURVE 5-45 - Ø 80 mm | White |
||||
| 11015050 - BW13 BAHIA® CURVE 5-45 D80 PRES | White |
||||
| 11015027 - B31 BAHIA® CURVE 5-45 - Ø 125 mm - White | Hygro B;Hygro A |
F1 |
Lagoon blue |
||
| 11015028 - B31 BAHIA® CURVE 5-45 shaftless - White | Hygro B;Hygro A |
F1 |
Lagoon blue |
||
| 11015029 - B32 BAHIA® CURVE 5-45 - Ø 125 mm - White | Hygro B |
F3 |
Lagoon blue |
||
| 11015417 - BAHIA CURVE S 16-60 D80 100PA | White |
||||
| 11015418 - BAHIA CURVE S 16-60/60 D80 PRES 100 PA | White |
||||
| 11015030 - B32 BAHIA® CURVE 5-45 shaftless - White | Hygro B |
F3 |
Lagoon blue |
||
| 11015031 - B33 BAHIA® CURVE 10-50 - Ø 125 mm - White | Hygro B;Hygro A |
F5 |
Lagoon blue |
||
| 11015470 - W13 BAHIA® CURVE S 5/30 - Ø 125 mm push 9 V - White | Hygro B;Hygro A |
Push button |
F1 |
Lagoon blue |
|
| 11015471 - W13 BAHIA® CURVE S 5/30 - Ø 80 mm push 9 V - White | Hygro B;Hygro A |
Push button |
F1 |
Lagoon blue |
|
| 11015474 - W13 BAHIA® CURVE S 5/30 - Ø 125 mm presence - White | Hygro B;Hygro A |
F1 |
Lagoon blue |
||
| 11015032 - B33 BAHIA® CURVE 10-50 shaftless - White | Hygro B;Hygro A |
F5 |
Lagoon blue |
||
| 11015148 - BW31 BAHIA® CURVE 5-45/30 m3/h - Ø 125 mm pull cord - White | Hygro B;Hygro A |
Pull cord |
F1 |
Lagoon blue |
|
| 11015149 - BW31 BAHIA® CURVE 5-45/30 m3/h - Ø 125 mm presence - White | Hygro B;Hygro A |
F1 |
Lagoon blue |
||
| 11015151 - BW32 BAHIA® CURVE 10-50/30 m3/h - Ø 125 mm pull cord - White | Hygro B;Hygro A |
Pull cord |
F3 |
Lagoon blue |
|
| 11015152 - BW32 BAHIA® CURVE 10-50/50 m3/h - Ø 125 mm presence - White | Hygro B;Hygro A |
F3 |
Lagoon blue |
||
| 11015154 - BW33 BAHIA® CURVE 15-50/50 m3/h - Ø 125 mm pull cord - White | Hygro B;Hygro A |
Pull cord |
F5 |
Lagoon blue |
|
| 11015155 - BW33 BAHIA® CURVE 15-50/50 m3/h - Ø 125 mm presence - White | Hygro B;Hygro A |
F5 |
Lagoon blue |
||
| 11015159 - BW31 BAHIA® CURVE S 5-45/30 m3/h shaftless pull cord - White | Hygro B;Hygro A |
Pull cord |
F1 |
Lagoon blue |
|
| 11015160 - BW32 BAHIA® CURVE S 10-50/30 m3/h shaftless pull cord - White | Hygro B;Hygro A |
Pull cord |
F3 |
Lagoon blue |
|
| 11015161 - BW33 BAHIA® CURVE S 15-50/50 m3/h shaftless pull cord - White | Hygro B;Hygro A |
Pull cord |
F5 |
Lagoon blue |
|
| 11015162 - BW31 BAHIA® CURVE S 5-45/30 m3/h shaftless presence - White | Hygro B;Hygro A |
F1 |
Lagoon blue |
||
| 11015163 - BW32 BAHIA® CURVE S 10-50/30 m3/h shaftless presence - White | Hygro B;Hygro A |
F3 |
Lagoon blue |
||
| 11015164 - BW33 BAHIA® CURVE S 15-50/50 m3/h shaftless presence - White | Hygro B;Hygro A |
F5 |
Lagoon blue |
||
| 11015472 - W13 BAHIA® CURVE 5/30 - Ø 125 mm pull cord - White | Hygro B;Hygro A |
Pull cord |
F1 |
Lagoon blue |
|
| 11015473 - W13 BAHIA® CURVE 5/30 - Ø 80 mm pull cord - White | Hygro B;Hygro A |
Pull cord |
F1 |
Lagoon blue |
|
| 11015482 - W13 BAHIA® CURVE 5/30 shaftless pull cord - White | Hygro B;Hygro A |
Pull cord |
F1 |
Lagoon blue |
|
| 11015488 - W13 BAHIA® CURVE 5/30 shaftless presence - White | Hygro B;Hygro A |
F1 |
Lagoon blue |
||
| 11015024 - B21 BAHIA® CURVE 5-45 - Ø 80 mm - White | Hygro A;Hygro B |
F1 |
Lagoon blue |
||
| 11015025 - B22 BAHIA® CURVE 10-50 - Ø 80 mm - White | Hygro A |
F3 |
Lagoon blue |
||
| 11015026 - B23 BAHIA® CURVE 15-50 - Ø 80 mm - White | Hygro A;Hygro B |
F6 |
Lagoon blue |
||
| 11015144 - BW21 BAHIA® CURVE 5-45/30 m3/h - Ø 80 mm presence - White | Hygro A;Hygro B |
F1 |
Lagoon blue |
||
| 11015146 - BW22 BAHIA® CURVE 15-50/50 m3/h - Ø 80 mm presence - White | Hygro A;Hygro B |
F3 |
Lagoon blue |
| References | H (mm) | L (mm) | Ø connection (mm) |
|---|---|---|---|
| 11015463 - B32 BAHIA® CURVE 5-45 - Ø 125 mm - White | |||
| 11015464 - B13 BAHIA® CURVE 5-45 - Ø 80 mm | |||
| 11015050 - BW13 BAHIA® CURVE 5-45 D80 PRES | |||
| 11015027 - B31 BAHIA® CURVE 5-45 - Ø 125 mm - White | 155 |
48 |
125 |
| 11015028 - B31 BAHIA® CURVE 5-45 shaftless - White | 155 |
48 |
Sans fût |
| 11015029 - B32 BAHIA® CURVE 5-45 - Ø 125 mm - White | 155 |
48 |
125 |
| 11015417 - BAHIA CURVE S 16-60 D80 100PA | |||
| 11015418 - BAHIA CURVE S 16-60/60 D80 PRES 100 PA | |||
| 11015030 - B32 BAHIA® CURVE 5-45 shaftless - White | 155 |
48 |
Sans fût |
| 11015031 - B33 BAHIA® CURVE 10-50 - Ø 125 mm - White | 155 |
48 |
125 |
| 11015470 - W13 BAHIA® CURVE S 5/30 - Ø 125 mm push 9 V - White | 155 |
48 |
125 |
| 11015471 - W13 BAHIA® CURVE S 5/30 - Ø 80 mm push 9 V - White | 155 |
48 |
80 |
| 11015474 - W13 BAHIA® CURVE S 5/30 - Ø 125 mm presence - White | 155 |
48 |
125 |
| 11015032 - B33 BAHIA® CURVE 10-50 shaftless - White | 155 |
48 |
Sans fût |
| 11015148 - BW31 BAHIA® CURVE 5-45/30 m3/h - Ø 125 mm pull cord - White | 155 |
48 |
125 |
| 11015149 - BW31 BAHIA® CURVE 5-45/30 m3/h - Ø 125 mm presence - White | 155 |
48 |
125 |
| 11015151 - BW32 BAHIA® CURVE 10-50/30 m3/h - Ø 125 mm pull cord - White | 155 |
48 |
125 |
| 11015152 - BW32 BAHIA® CURVE 10-50/50 m3/h - Ø 125 mm presence - White | 155 |
48 |
125 |
| 11015154 - BW33 BAHIA® CURVE 15-50/50 m3/h - Ø 125 mm pull cord - White | 155 |
48 |
125 |
| 11015155 - BW33 BAHIA® CURVE 15-50/50 m3/h - Ø 125 mm presence - White | 155 |
48 |
125 |
| 11015159 - BW31 BAHIA® CURVE S 5-45/30 m3/h shaftless pull cord - White | 155 |
48 |
Sans fût |
| 11015160 - BW32 BAHIA® CURVE S 10-50/30 m3/h shaftless pull cord - White | 155 |
48 |
Sans fût |
| 11015161 - BW33 BAHIA® CURVE S 15-50/50 m3/h shaftless pull cord - White | 155 |
48 |
Sans fût |
| 11015162 - BW31 BAHIA® CURVE S 5-45/30 m3/h shaftless presence - White | 155 |
48 |
Sans fût |
| 11015163 - BW32 BAHIA® CURVE S 10-50/30 m3/h shaftless presence - White | 155 |
48 |
Sans fût |
| 11015164 - BW33 BAHIA® CURVE S 15-50/50 m3/h shaftless presence - White | 155 |
48 |
Sans fût |
| 11015472 - W13 BAHIA® CURVE 5/30 - Ø 125 mm pull cord - White | 155 |
48 |
125 |
| 11015473 - W13 BAHIA® CURVE 5/30 - Ø 80 mm pull cord - White | 155 |
48 |
80 |
| 11015482 - W13 BAHIA® CURVE 5/30 shaftless pull cord - White | 155 |
48 |
Sans fût |
| 11015488 - W13 BAHIA® CURVE 5/30 shaftless presence - White | 155 |
48 |
Sans fût |
| 11015024 - B21 BAHIA® CURVE 5-45 - Ø 80 mm - White | 155 |
48 |
80 |
| 11015025 - B22 BAHIA® CURVE 10-50 - Ø 80 mm - White | 155 |
48 |
80 |
| 11015026 - B23 BAHIA® CURVE 15-50 - Ø 80 mm - White | 155 |
48 |
80 |
| 11015144 - BW21 BAHIA® CURVE 5-45/30 m3/h - Ø 80 mm presence - White | 155 |
48 |
80 |
| 11015146 - BW22 BAHIA® CURVE 15-50/50 m3/h - Ø 80 mm presence - White | 155 |
48 |
80 |
| References | Basic airflow (m³/h) | Boost airflow (m³/h) | Relative humidity (%) | Pressure range (Pa) |
|---|---|---|---|---|
| 11015463 - B32 BAHIA® CURVE 5-45 - Ø 125 mm - White | 5-45 |
80-160 |
||
| 11015464 - B13 BAHIA® CURVE 5-45 - Ø 80 mm | 5-45 |
80-160 |
||
| 11015050 - BW13 BAHIA® CURVE 5-45 D80 PRES | 5-45 |
30 |
80-160 |
|
| 11015027 - B31 BAHIA® CURVE 5-45 - Ø 125 mm - White | 5-45 |
45/85 |
80-160 |
|
| 11015028 - B31 BAHIA® CURVE 5-45 shaftless - White | 5-45 |
45/85 |
80-160 |
|
| 11015029 - B32 BAHIA® CURVE 5-45 - Ø 125 mm - White | 5-45 |
36/76 |
80-160 |
|
| 11015417 - BAHIA CURVE S 16-60 D80 100PA | 16-60 |
|||
| 11015418 - BAHIA CURVE S 16-60/60 D80 PRES 100 PA | 16-60 |
60 |
||
| 11015030 - B32 BAHIA® CURVE 5-45 shaftless - White | 5-45 |
30/70 |
80-160 |
|
| 11015031 - B33 BAHIA® CURVE 10-50 - Ø 125 mm - White | 10-50 |
30/70 |
80-160 |
|
| 11015470 - W13 BAHIA® CURVE S 5/30 - Ø 125 mm push 9 V - White | 5 |
30 |
80-160 |
|
| 11015471 - W13 BAHIA® CURVE S 5/30 - Ø 80 mm push 9 V - White | 5 |
30 |
80-160 |
|
| 11015474 - W13 BAHIA® CURVE S 5/30 - Ø 125 mm presence - White | 5 |
30 |
80-160 |
|
| 11015032 - B33 BAHIA® CURVE 10-50 shaftless - White | 10-50 |
30/70 |
80-160 |
|
| 11015148 - BW31 BAHIA® CURVE 5-45/30 m3/h - Ø 125 mm pull cord - White | 5-45 |
30 |
45/85 |
80-160 |
| 11015149 - BW31 BAHIA® CURVE 5-45/30 m3/h - Ø 125 mm presence - White | 5-45 |
30 |
45/85 |
80-160 |
| 11015151 - BW32 BAHIA® CURVE 10-50/30 m3/h - Ø 125 mm pull cord - White | 10-50 |
30 |
28/68 |
80-160 |
| 11015152 - BW32 BAHIA® CURVE 10-50/50 m3/h - Ø 125 mm presence - White | 10-50 |
50 |
28/68 |
80-160 |
| 11015154 - BW33 BAHIA® CURVE 15-50/50 m3/h - Ø 125 mm pull cord - White | 15-50 |
50 |
31/66 |
80-160 |
| 11015155 - BW33 BAHIA® CURVE 15-50/50 m3/h - Ø 125 mm presence - White | 15-50 |
50 |
31/66 |
80-160 |
| 11015159 - BW31 BAHIA® CURVE S 5-45/30 m3/h shaftless pull cord - White | 5-45 |
30 |
45/85 |
80-160 |
| 11015160 - BW32 BAHIA® CURVE S 10-50/30 m3/h shaftless pull cord - White | 10-50 |
30 |
28/68 |
80-160 |
| 11015161 - BW33 BAHIA® CURVE S 15-50/50 m3/h shaftless pull cord - White | 15-50 |
50 |
31/66 |
80-160 |
| 11015162 - BW31 BAHIA® CURVE S 5-45/30 m3/h shaftless presence - White | 5-45 |
30 |
45/85 |
80-160 |
| 11015163 - BW32 BAHIA® CURVE S 10-50/30 m3/h shaftless presence - White | 10-50 |
30 |
28/68 |
80-160 |
| 11015164 - BW33 BAHIA® CURVE S 15-50/50 m3/h shaftless presence - White | 15-50 |
50 |
31/66 |
80-160 |
| 11015472 - W13 BAHIA® CURVE 5/30 - Ø 125 mm pull cord - White | 5 |
30 |
80-160 |
|
| 11015473 - W13 BAHIA® CURVE 5/30 - Ø 80 mm pull cord - White | 5 |
30 |
80-160 |
|
| 11015482 - W13 BAHIA® CURVE 5/30 shaftless pull cord - White | 5 |
30 |
80-160 |
|
| 11015488 - W13 BAHIA® CURVE 5/30 shaftless presence - White | 5 |
30 |
80-160 |
|
| 11015024 - B21 BAHIA® CURVE 5-45 - Ø 80 mm - White | 5-45 |
45/80 |
80-160 |
|
| 11015025 - B22 BAHIA® CURVE 10-50 - Ø 80 mm - White | 10-50 |
31/71 |
80-160 |
|
| 11015026 - B23 BAHIA® CURVE 15-50 - Ø 80 mm - White | 15-50 |
20/55 |
80-160 |
|
| 11015144 - BW21 BAHIA® CURVE 5-45/30 m3/h - Ø 80 mm presence - White | 5-45 |
30 |
36/76 |
80-160 |
| 11015146 - BW22 BAHIA® CURVE 15-50/50 m3/h - Ø 80 mm presence - White | 15-50 |
50 |
21/56 |
80-160 |
- QB-certified : Humidity-controlled exhaust terminals
- Identification no. QB37 : 05/02-CHY3-2266;05/02-CHY3-2267;05/02-CHY3-2185
- Technical Opinion no. : 14.5/17-2267;14.5/17-2266;14.5/17-2185
- ESC data sheet no. 1 : BAR-TH-127
