ORDONE smoke exhaust panel

The ORDONE smoke exhaust control panel can locate the source of the alarm and automatically send the smoke and heat exhaust command using appropriate storey boxes.

• capacity: 16 zones = 16 storeys on 1 bus, or 8 storeys on 2 bus,
• max. 2 BCE boxes (1 per bus),
• max. 4 BNS boxes,
• mains power supply: 230V + 10 %-15 % - 50 Hz,
• mains consumption: max 12 W,
• rated voltage: 24 VDC,
• 2 timed-operation command outputs for smoke and heat exhaust fan,
• secondary source: 2 x 12V / 7Ah lead batteries, maintenance-free (supplied),
  • battery life: 12 hours on standby following by 1 hour in failsafe mode,
• fan control: by NO contact 1A 30 VDC, 10-sec timer,
• report contact: Fire Alarm x 2, Inverter disturbance 1 A 30 VDC,
• dimensions (mm): Length x Height x Depth = 265 x 482 x 120.

• BEA storey box:
  • dimensions (mm): L x H x D = 190 x 150 x 90,
  • beyond 3 dampers for 1 BEA, an additional power supply is needed (consult us).

us).

• MDR modules:
  • serve to avoid any risk of polarity inversion when installing the diodes,
  • pre-wired modules with built-in diode,
  • black MDR = intermediate modules,
  • red MDR = end of line, used for last damper on each storey.
• BCE exhaust control box:
  • automatically controls the opening of the natural vent in case of failure of the smoke and heat exhaust fan,
  • 24 V safety box output, current make,
  • max. 24 V natural draw damper output, current make,
  • inverter contact on natural draw damper control,
  • dimensions (mm): L x H x D = 190 x 150 x 90.
• BNS elevator non-stop box:
  • ensures elevator non-stop function,
  • number of contacts = 16 (1 per storey), NO or NC,
  • dimensions (mm): L x H x D = 190 x 150 x 90.

• install ORDONE smoke exhaust control panel,
• BEA box:
  • Install on each building storey in the technical duct.
• BNS box:
  • Install next to elevator machinery.
• BCE box:
  • Install near to exhaust fan unit.