OXYTONE Blades 2013
Fresh air intake
OXYTONE Blades 2013
Fresh air intake
The OXYTONE Lames 2013 air inlet provides fresh air in case of fire. Its motorised reset makes maintenance easier.
OXYTONE Blades 2013
OXYTONE Lames 2013 is a remote-controlled bladed vent for air inlet in smoke and heat exhaust applications. It is available as standard in dimensions from 330 x 600 / 475 x 350 to 1350 x 1100 /1225 x 1350 in increments of 125 mm. It exists in an insulated version with/without motorised reset.
The + products
- version with remote reset possible,
- opens outwards,
- inside, GFAP 007 grille with removable core.
- insulated version,
- door installation kit,
- extended range of dimensions.
OXYTONE Lames 2013 is a remote-controlled bladed vent for air inlet applications. It opens when instructed by the FACP. The start / end limit position switches detect the position of the vent and its correct operation.
- mechanical damper comprising an aluminium frame (natural anodised finish), in which horizontal blades pivot (same finish as frame),
- INSULATED version with blades lined with 23 mm of M1 expanded polystyrene (K=1,55 W/m/°C), enclosed in a PVC box,
-
actuating mechanism:
- link chain driven by spring located behind blades,
- electrical connection via terminal box.
- fitted with 3.5 W current-make or 1.6 W current-break remote trip device, 24V or 48V,
- manual reset (standard) or 24V electric (factory-fitted or site-fitted option),
- start and end limit position signal contacts available as optional extras. Can be doubled.
- always keep blades in horizontal position,
-
intended for installation on exterior façade:
- on metal partition,
- on concrete wall (mounting frame recommended).
- OXYTONE Lames 2013 can be installed on a wooden wall using an adapter kit.
| Insulation material |
|---|
> OXYTONE LAMES 2013 dimensions: - nominal dimensions: L x H, - dimensions of opening with sealed mounting frame: (L+50) x (H+50), - dimensions of opening without mounting frame: (L+5) x (H+5). > Dimensions with GFAP: - nominal dimensions: GFAP 007: X x Y, - selection with mounting frame: X = L Y = H, - selection without mounting frame: X = L - 45mm Y = H - 45mm, - check that X and Y are multiple of 25 mm.
| References | Lmin x Hmin (mm) | Lmax x Hmax (mm) |
|---|---|---|
| 11044342 - OXYTONE Lames 2013 with choice of options | 330 x 475 ou 475 x 350 |
1100 x 1350 |
| 11044343 - OXYTONE Lames 2013 Insulated with choice of options | 330 x 475 ou 475 x 350 |
1100 x 1350 |
| 11044348 - OXYTONE LAMES 2013 8 MOTORS POWER SUPPLY BOX | ||
| 11044349 - OXYTONE LAMES 2013 1 MOTORS POWER SUPPLY BOX | ||
| 11044350 - OXYTONE LAMES 2013 2 MOTORS POWER SUPPLY BOX | ||
| 11044351 - OXYTONE LAMES 2013 4 MOTORS POWER SUPPLY BOX | ||
| 11044353 - INSTALLATION KIT OXYTONE LAMES / AIRONE WOOD PANEL | ||
| 11044354 - OXYTONE LAMES 2013 MOTOR KIT |
Products and accessories references
Documents
Showing 1 - y of
document
-
Certificate NF-S 61 937 OXYTONE Blades 2013Conformities895 KB
-
OXYTONE Blades 2013 Installation & maintenance instructionsManuals367 KB
-
AIRONE/ OXYTONE BLADES wood panel kit installation instructionsManuals402 KB
-
Ouvrant AIRONE / OXYTONE Lames 2012 Installation instructions Contre CadreManuals199 KB
-
OXYTONE Blades 2013 Re-Arming Chest Installation InstructionsManuals167 KB
-
OXYTONE Blades 2013 Additional Contacts Installation instructionsManuals251 KB
-
OXYTONE Blades 2013 Isolants Installation instructionsManuals260 KB
-
OXYTONE Blades 2013 Reset Engine Installation instructionsManuals380 KB
-
OXYTONE Blades 2013 Blade Adjustment Installation instructionsManuals210 KB
-
OXYTONE Blades 2013 with Snap Release Installation instructionsManuals189 KB
