ProtectONE® T range
  • Easily adjusted airflow with the exclusive ProtectONE® Adapt system.
  • All-in-One solution: saves time on cabling, operational guarantee and simplified installation on site.
  • Fully removable as standard.
  • Thermal insulation for installation in equipment room.
  • Access side to motor adjustable on site.

Discover the range

ProtectONE® T range
  • ProtectONE® T is a range of smoke and heat exhaust fans with belt and pulley drive.

  • Two models depending on the impeller (forward curve or backward curve):
  • ProtectONE® TA (forward curve impeller), 9 unit sizes offering airflow rates from 1,000 to 40,000 m³/h,

    ProtectONE® TR (backward curve impeller), 8 unit sizes offering airflow rates from 1,000 to 35,000 m³/h. This enables better results due to lower airflow variation when the load varies.

  • The ProtectONE® T range offer three options of F class IP54 motors:
  • 1-speed

    2-speed, independent windings,

    2-speed, Dahlander windings.

  • Our units are equipped with the ProtectONE®Adapt system exclusive to Aldes, which serves to adjust the exhaust airflow (up to 25%) to reach the optimum operating point easily, safely and in full observance of the compliance report.

  • Possible to padlock the proximity switch.
  • Made in France.
  • CE certification: 1812-CPR-1548
  • IP54 protection rating.
  • Smoke and heat extraction in case of fire in all non-residential buildings.
  • Extraction of stale air in non-residential and industrial buildings (ProtectONE® TR).
  • Extraction of pollutants in professional kitchens (ProtectONE® TR).
    ProtectONE® rapid airflow adjustment device included in unit.
    ProtectONE® T is controlled by the FACP via the AXONE safety box.
  • Can be installed indoors or outdoors.
  • Indoor installation: use thermal-acoustic insulation option (EN 12101-3).
  • >Outdoor installation: use screened rain hood + grille.
  • Proximity switch supplied fitted and connected with limit switches.