INEA
INEA
INEA is a continuous extractor for small rooms, ensuring 24/7 comfort. 2 operating modes: switch or humidity detection.
INEA
The INEA range of continuous extractors with a modern, sleek design can be seamlessly integrated into your dwelling. These units provide 24/7 ventilation of a space (bathroom, WC or laundry room) while ensuring optimum comfort thanks to their silent operation and low consumption.
The + products
- decorative: modern and sleek design,
- delivers continuous comfort: ventilates 24/7,
- compatible with discharge duct up to 10 m.
- boost airflow possible with manual activation or automatic based on humidity level,
- low energy consumption, as low as 5 W,
- low noise level: as low as 23 dB(A).
INEA continuous extractors deliver ongoing ventilation of a space up to 7 m²: bathroom, WC or laundry room.
2 operating modes:
-
- switch-operated activation of Boost mode and return to Auto mode (I version),
- activation of Boost mode by humidity level detection and adjustable timer-controlled return to Auto mode (H version).
-
1 diameter:
- Ø 100 mm for rooms up to 7 m²; bathroom, WC, laundry room.
-
2 operating modes:
- switch-operated activation of Boost mode and return to Auto mode (I version),
- activation of Boost mode by humidity level detection and adjustable timer-controlled return to Auto mode (H version).
- very low-consumption motor with low noise level,
- removable backdraft damper at rear of fan,
- foam installed at rear to reduce vibrations and prevent condensation,
- built-in thermal protection,
-
material:
- high quality ABS body and decorative cover.
- cardboard packaging.
- continuous operation with manual boost operation (I version): switch-operated start and stop (switch not supplied)
-
continuous operation with automatic boost mode activated by humidity level detection (H version):
- activation of boost mode by humidity level, adjustable between 60% and 90%. Activation is automatic if the ambient humidity level exceeds the preset threshold value,
- timer on activation: 45 seconds,
- timer-controlled return to AUTO mode, adjustable between 2 and 30 minutes. Once the indoor humidity level has returned to below the activation threshold, the boost mode operates for the pre-determined time then automatically returns to Auto mode.
- fitted using 4 screws supplied,
- wall or ceiling attachment,
- maximum length of discharge duct 10 m,
- switch-operated on/off for manual version (I),
- fresh air brought into room via air inlet grille or door undercut.
| References | Surface-mounted thickness (mm) | Operation | Number of speeds | Maximum extract air temperature (°C) | Insulation material | Type of control | Type of finish | Type of motor | Colour |
|---|---|---|---|---|---|---|---|---|---|
| 11022380 - INEA 100 I | 38 |
Switch-operated activation of Boost mode and return to Auto mode |
2 |
40 |
Switch |
White |
AC |
White |
|
| 11022381 - INEA 100 H | 38 |
|
2 |
40 |
White |
AC |
White |
| H (mm) | L (mm) | P (mm) | Ø discharge (mm) | Weight (kg) |
|---|---|---|---|---|
| 180 |
180 |
117 |
99 |
0,61 |
| Max. airflow (m³/h) |
|---|
| 77 |
| Sound pressure at 3 m (dB(A)) |
|---|
| 23 |
| Consumption (max. power at basic airflow) (W) | Max. power at peak airflow (W) |
|---|---|
| 5 |
8 |
| Frequency (Hz) | Protection rating | Protection current (A) | Voltage (V) | Max. power |
|---|---|---|---|---|
| 50 |
IP44 |
2 |
220/240 |
8 |
- Text ErP - Ventilation : Complies with eco-design Regulation 1253/2014 and excluded from energy labelling Regulation 1254/2014 as maximum power is below 30 W.
| Electrical insulation class |
|---|
| Class 2 |
