DECO
DECO
DECO is an ultra-discreet extractor fan: very quiet, available in white or aluminium finish. For large or small rooms (2 diameters), with 3 options: switch, timer-controlled stop or humidity detection.
DECO
DECO is a range of intermittent extractor fans with a decorative white or aluminium front panel, for easy installation in your dwelling. These fans provide intermittent ventilation of a room: WC, bathroom, kitchen, utility room, etc. depending on the diameter chosen. All while adapting to your pace of life and ensuring optimum comfort with their silent operation and low energy consumption.
The + products
- aesthetic: white finish or aluminium trim,
- very quiet: as low as 26 dB(A),
- very low energy consumption: as low as 5.6 W.
- available in white or aluminium finish
- DECO intermittent extractors deliver intermittent ventilation of a space: kitchen, bathroom, WC or laundry room (depending on the diameter chosen),
-
3 operating modes:
- switch-operated start/stop (version I),
- switch-operated start and adjustable timer-controlled stop (T version)
- activation by detection of humidity level, adjustable timer-controlled stop (H version),
-
2 diameters:
- Ø 100 mm for rooms up to 7 m²; bathroom, WC, laundry room,
- Ø 125 mm for rooms from 7 to 12 m²: kitchen, bathroom, WC, laundry room.
-
3 operating modes:
- Switch-operated start/stop (version I),
- Switch-operated start and adjustable timer-controlled stop (version T),
- activation by detection of humidity level, adjustable timer-controlled stop (H version),
- Low-consumption motor with low noise level,
- removable backdraft damper at rear of fan,
- built-in thermal protection,
-
material:
- high quality ABS body,
- decorative ABS cover with aluminium trim (for aluminium finish).
- supplied in a display carton.
- manual operation (version I): switch-operated start and stop (switch not supplied),
-
timer-controlled operation with adjustable timer (T version):
- switch-operated start,
- timer-controlled shutdown, adjustable from 2 to 30 minutes.
-
automatic operation with humidity detection (H version):
- activation of boost mode by humidity level, adjustable between 60% and 90%. Activation is automatic if the ambient humidity level exceeds the preset threshold value,
- timer-controlled shutdown, adjustable between 2 and 30 minutes. Once the indoor humidity level has returned to below the activation threshold, the extractor operates for the pre-set duration then automatically shuts down.
- attachment using 4 screws supplied,
- wall or ceiling attachment,
- maximum length of output duct: 2 m,
- manual and timed stop-start operation using a switch,
- fresh air brought into room via air inlet grille or door undercut.
- Text ErP - Ventilation : Complies with eco-design Regulation 1253/2014 and excluded from energy labelling Regulation 1254/2014 as maximum power is below 30 W.