RG / RGP aluminium dampers
Balancing damper
RG / RGP aluminium dampers
Balancing damper
The aluminium balancing damper is used to adjust the pressure in aluminium ducting branches in commercial or multi-occupancy residential buildings.
RG / RGP aluminium dampers
The aluminium balancing damper is used to adjust the pressure in aluminium ducting branches in commercial or multi-occupancy residential buildings. The RGP aluminium balancing damper enables finer pressure adjustment than a standard damper, as it avoids closing off a duct branch fully (especially in gas CMEV systems).
The + products
- range compliant with gas CMEV requirements,
- suited to systems operating in saline atmospheres.
- available in diameters from 125 to 315,
- aluminium 1050A-H18 (formerly A5) compliant with DTU 68.3 for gas CMEV,
- screw-locked plastic handle, M1 certified Lexan shafts,
- RGP: perforated disc with 40% air passage, Ø 5 holes,
- maximum operating temperature: + 120°C,
- M0 fire certification.
- easy assembly of interlocking accessories: ducts are female, accessories are male,
- Final seal requires sealant and/or perforated strip,
- attached to duct using self-tapping screws (4 to 6 depending on diameter).
| Insulation material |
|---|
| References | Ø (mm) |
|---|---|
| 11095810 - RG ALU - D125 | 125 |
| 11095811 - RG ALU - D160 | 160 |
| 11095812 - RG ALU - D200 | 200 |
| 11095813 - RG ALU - D250 | 250 |
| 11095814 - RG ALU - D315 | 315 |
| 11095815 - RGP ALU - D125 | 125 |
| 11095816 - RGP ALU - D160 | 160 |
| 11095818 - RGP ALU - D200 | 200 |
| 11095819 - RGP ALU - D250 | 250 |
| 11095820 - RGP ALU - D315 | 315 |
