VC MICRO-WATT
Duct fan
VC MICRO-WATT
Duct fan
This small duct fan supports the main fan unit on a highly-resistant system.
VC MICRO-WATT
The VC Micro-watt duct fan can work in both directions, air supply or exhaust. Its in-line connections means it can be seamlessly integrated into a circular ducting system. Its galvanised steel body offers protection against corrosion.
A centrifugal impeller coupled to the EC low-consumption motor significantly reduces its power consumption. Thermal protection is built into the motor winding for greater safety.
Coupled with the constant pressure controller kit (accessory), it is possible to configure 2 pressure settings for day and night (dry contact switch) over a wide range from 10 to 990 Pa.
This small duct fan can be installed in a duct section to support the main fan unit on a highly-resistant system.
The interest of these fans is that the airflow is linear for maximum simplification of the ducting system, while equipped with centrifugal impellers.
A centrifugal impeller coupled to the EC low-consumption motor significantly reduces its power consumption. Thermal protection is built into the motor winding for greater safety.
Coupled with the constant pressure controller kit (accessory), it is possible to configure 2 pressure settings for day and night (dry contact switch) over a wide range from 10 to 990 Pa.
This small duct fan can be installed in a duct section to support the main fan unit on a highly-resistant system.
The interest of these fans is that the airflow is linear for maximum simplification of the ducting system, while equipped with centrifugal impellers.
The + products
- EC low consumption motors,
- constant pressure controller kit (accessory),
- airflow up to 1990 m3/h,
- backward curve impeller.
Low-consumption duct fan for air supply or exhaust on circular ducting for commercial and industrial premises.
- 6 models, up to 1,990 m 3 /h in Ø 315,
- EC low-consumption motor 230 V - 50 Hz,
- IP 44,
- galvanised sheet body with in-line connections,
- centrifugal impeller,
- thermal protection built into motor winding.
- horizontal / vertical,
- suspended ceiling / equipment room,
- recommended to install with anti-vibration collars to prevent transmission of vibrations and make servicing easier.
Insulation material | Type of motor |
---|---|
EC |
References | A (mm) | B (mm) | C (mm) | D (mm) | Weight (kg) |
---|---|---|---|---|---|
11032010 - VC MICRO-WATT 100 | 100 |
188 |
288 |
30 |
2,8 |
11032011 - VC MICRO-WATT 125 | 125 |
188 |
288 |
30 |
2,7 |
11032012 - VC MICRO-WATT 160 | 160 |
170 |
379 |
30 |
3 |
11032013 - VC MICRO-WATT 200 | 200 |
198 |
379 |
30 |
3,9 |
11032014 - VC MICRO-WATT 250 | 250 |
195 |
379 |
30 |
5 |
11032015 - VC MICRO-WATT 315 | 315 |
187 |
402 |
33 |
6 |
References | Airflow (m³/h) | Max. airflow (m³/h) |
---|---|---|
11032010 - VC MICRO-WATT 100 | 340 |
340 |
11032011 - VC MICRO-WATT 125 | 460 |
460 |
11032012 - VC MICRO-WATT 160 | 670 |
670 |
11032013 - VC MICRO-WATT 200 | 970 |
970 |
11032014 - VC MICRO-WATT 250 | 1280 |
1280 |
11032015 - VC MICRO-WATT 315 | 1990 |
1990 |
References | Sound pressure at 3 m (dB(A)) |
---|---|
11032010 - VC MICRO-WATT 100 | 65 |
11032011 - VC MICRO-WATT 125 | 58 |
11032012 - VC MICRO-WATT 160 | 59 |
11032013 - VC MICRO-WATT 200 | 58 |
11032014 - VC MICRO-WATT 250 | 63 |
11032015 - VC MICRO-WATT 315 | 71 |
References | Frequency (Hz) | Protection rating | Max. current (A) | Voltage (V) | Max. power |
---|---|---|---|---|---|
11032010 - VC MICRO-WATT 100 | 50 |
IP44 |
0,8 |
230 |
90 |
11032011 - VC MICRO-WATT 125 | 50 |
IP44 |
0,9 |
230 |
103 |
11032012 - VC MICRO-WATT 160 | 50 |
IP44 |
0,9 |
230 |
105 |
11032013 - VC MICRO-WATT 200 | 50 |
IP44 |
1 |
230 |
121 |
11032014 - VC MICRO-WATT 250 | 50 |
IP44 |
1,6 |
230 |
183 |
11032015 - VC MICRO-WATT 315 | 50 |
IP44 |
1,9 |
230 |
270 |
- Technical Opinion no. : 14.5/16-2185_V2
- Text ErP - Ventilation : Complies with eco-design regulation 1253/2014 and energy labelling regulation 1254/2014 for ventilation. Energy classes:
Electrical insulation class |
---|
Class 2 |