Nano Air® 50
Nano Air® 50
The heat recovery ventilation solution for individual rooms, which combine healthier air, preservation of the building and savings on heating costs.
Nano Air® 50
Compact heat recovery ventilation solution built into the wall to ventilate a room. Fitted with a ceramic heat exchanger, its renews air while recovering heat calories from warm stale air to supply fresh, pre-heated and filtered air.
The + products
- more ease of installation: no ducts installed in the house.
- more silence: exceptionally low noise level.
- more purified air: through its efficient filter system to remove dust, pollen and insects.
In Heat Recovery mode, the Nano Air® alternates its operation with two cycles lasting 70 seconds each.
- Cycle I: Warm stale air is removed from the room.
- Cycle II: Fresh air is drawn in from outside, filtered and supplied into the room.
- 3 speed modes available.
- airflow from 14 m3/h to 54 m3/h.
- 2 pollen filters.
- EC motor.
- ceramic heat accumulator, efficiency up to 88 %.
-
control possible using remote control or buttons on product:
- manually, with three-position selector switches to provide basic functions,
- with the remote control, for more accurate control (night mode, humidity parameters).
-
operating temperature limit:
- ambient temperature from -20°C to +50°C, relative humidity up to 80%.
- 2-year warranty.
- a round hole of diameter 180 mm must be drilled in the wall to fit the Nano Air® 50.
- the air duct is fitted into the wall using the polystyrene wedges supplied and builders foam.
- the telescopic end of the air duct must enable the outer ventilation grille to be fitted.
- the air duct must provide a minimum slope of 3 mm on the outside wall.
| Insulation material | Type of motor |
|---|---|
| EC |
| References | Frequency (Hz) | Protection rating | Voltage (V) |
|---|---|---|---|
| 11023463 - Nano Air® 50 | |||
| 11023290 - Nano Air® 50 heat recovery CMEV for individual rooms | 50 |
IP24 |
230 |
- Energy class ErP- Ventilation : A
- Text ErP - Ventilation : Complies with eco-design regulation 1253/2014 and energy labelling regulation 1254/2014 for ventilation. Energy classes: see ErP regulation page.
| References | Ventilation energy class - Average climate |
|---|---|
| 11023463 - Nano Air® 50 | |
| 11023290 - Nano Air® 50 heat recovery CMEV for individual rooms | A |
Products and accessories references
Documents
2 software
-
Plateforme logiciel métier de conception de projets de ventilation
