DESIGN

DESIGN intermittent extractors deliver intermittent ventilation of a space: bathroom, WC, laundry room or large kitchens (depending on the diameter chosen).

4 operating modes:

• • switch-operated start/stop (version I),
  • switch-operated start and adjustable timer-controlled stop (T version)
  • activation by detection of humidity level, adjustable timer-controlled stop (H version),
  • activation by detection of occupancy, adjustable timer-controlled stop (P version),

• 3 diameters:
  • Ø 100 mm for rooms up to 7 m²; bathroom, WC, laundry room,
  • Ø 125 mm for rooms from 7 to 12 m²: kitchen, bathroom, WC, laundry room,
  • Ø 150 mm for rooms larger than 12 m²: large kitchen and large bathroom
• 3 operating modes:
  • Switch-operated start/stop (version I),
  • Switch-operated start and adjustable timer-controlled stop (version T),
  • activation by detection of humidity level, adjustable timer-controlled stop (H version),
  • activation by detection of occupancy, adjustable timer-controlled stop (P version),
• Low-consumption motor with low noise level,
• removable backdraft damper at rear of fan,
• built-in thermal protection,
• material:
  • high quality ABS body,
  • decorative ABS cover with aluminium trim (for aluminium finish).
• supplied in a display carton.

• manual operation (version I): instant switch-operated start and stop (switch not supplied),
• timer-controlled operation with adjustable timer (T version):
  • switch-operated start,
  • timer-controlled shutdown, adjustable from 2 to 30 minutes.
• automatic operation with humidity detection (H version):
  • activation of boost mode by humidity level, adjustable between 60% and 90%. Activation is automatic if the ambient humidity level exceeds the preset threshold value,
  • timer-controlled shutdown adjustable between 2 and 30 minutes. Once the indoor humidity level has returned to below the activation threshold, the extractor operates for the pre-set duration then automatically shuts down.
• automatic operation with occupancy detection (P version):
  • activation by detection of occupancy,
  • lens detection distance: 1 to 4 metres,
  • lens detection angle: 100°,
  • Timer-controlled shutdown, adjustable from 2 to 30 minutes.

• attachment using 4 screws supplied,
• wall or ceiling attachment,
• maximum length of output duct: 2 m,
• manual and timed stop-start operation using a switch,
• fresh air brought into room via air inlet grille or door undercut.