90° bend: 90° bend + seals
Connector
90° bend: 90° bend + seals
Connector
The sealed 90° bend is used to change the direction of a galvanised ducting system by a 90° angle while delivering class C airtight performance.
90° bend: 90° bend + seals
The sealed 90° bend is used to change the direction of a galvanised ducting system by a 90° angle while delivering class C airtight performance. The bends are pressed up to diameter 200, from 250 to 500 they use sectors.
The + products
- easy and quick to install,
- class C airtight performance,
- aesthetic ducting.
- available in diameters from 125 to 560,
- galvanised steel as per EN 10346 ensuring uniformity of coating,
- temperature range: - 30°C à + 100°C,
- resistant to ageing (> 30 years), UV and ozone,
- M0 fire certification,
- class C airtight performance as per standard NF EN 12237.
- to slot in or remove an accessory, rotate it slightly in the duct,
- as an airtight seal is automatically provided by the ALDES seal, no need to use sealant or adhesive tape,
- for vertical installations especially, the use of self-tapping screws remains recommended,
- time savings in relation to ducting with standard accessories is in the range of 20 % (at least 15 to 30 seconds saved per junction for diameters 125 to 315, or at least 30 to 60 seconds saved for each accessory in these diameters),
- ALDES sealed accessories are specially designed to ensure easy connection / disconnection. The ALDES range offers class C airtight performance and low connection torque.
| Insulation material |
|---|
| References | Ø (mm) |
|---|---|
| 11098142 - GALVA 90° pressed bend+seal - Ø 125 mm | 125 |
| 11098143 - GALVA 90° pressed bend+seal - Ø 160 mm | 160 |
| 11098144 - GALVA 90° pressed bend+seal - Ø 200 mm | 200 |
| 11098145 - GALVA 90° bend+seal - Ø 250 mm | 250 |
| 11098146 - GALVA 90° bend+seal - Ø 315 mm | 315 |
| 11098147 - GALVA 90° bend+seal - Ø 355 mm | 355 |
| 11098148 - GALVA 90° bend+seal - Ø 400 mm | 400 |
| 11098149 - GALVA 90° bend+seal - Ø 500 mm | 500 |
| 11098151 - GALVA 90° bend+seal - Ø 450 mm | 450 |
| 11098152 - GALVA 90° bend+seal - Ø 560 mm | 560 |
| Fire protection rating |
|---|
| M0 |
