Flat 90° Branch Connector: PEP Alu
Connector
Flat 90° Branch Connector: PEP Alu
Connector
The PEP aluminium flat 90° branch connector makes a right-angle branch on an aluminium rectangular duct.
Flat 90° Branch Connector: PEP Alu
The PEP aluminium flat 90° branch connector makes a right-angle branch on an aluminium rectangular duct.
The + products
- range compliant with gas CMEV requirements,
- suited to systems operating in saline atmospheres.
- available in diameters from 125 to 500,
- aluminium 1050A-H18 (formerly A5) compliant with DTU 68.3 for gas CMEV,
- M0 fire certification.
- when installing, pay special attention to pressures losses, noise and leaks that may be generated,
- easy assembly of interlocking accessories: ducts are female, accessories are male,
- final seal requires sealant and/or perforated strip,
- attached to duct using self-tapping screws (4 to 6 depending on diameter).
| Insulation material |
|---|
| References | Ø (mm) |
|---|---|
| 11096613 - PEP ALU FLAT CONNECTOR - D125 | 125 |
| 11096614 - PEP ALU FLAT CONNECTOR - D160 | 160 |
| 11096615 - PEP ALU FLAT CONNECTOR - D200 | 200 |
| 11096616 - PEP ALU FLAT CONNECTOR - D250 | 250 |
| 11096617 - PEP ALU FLAT CONNECTOR - D315 | 315 |
| 11096618 - PEP ALU FLAT CONNECTOR - D355 | 355 |
| 11096619 - PEP ALU FLAT CONNECTOR - D400 | 400 |
| 11096620 - PEP ALU FLAT CONNECTOR - D500 | 500 |
| 11096624 - PEP ALU FLAT CONNECTOR - D450 | 450 |
| Fire protection rating |
|---|
| M0 |
