ISONE®2.1 Europe rectangular Fire damper

ISONE®2.1 Europe rectangular

Fire damper

ISONE® 2.1 dampers are simple to select: a single model for all partitions and all fire resistance levels.

See references

Download CAD Library file

ISONE®2.1 Europe rectangular

> Fire dampers for commercial buildings (public access building, high-rise)
> They restore the fire resistance of partitions crossed by a ventilation duct.
> Equipped with 70°C thermal trip fuse by default
> Controllable by electromagnetic coil trip device: 24/48 V DC current emission; 24 V DC or 48 V DC current break
- Reset motor 24/48 V
> Fire resistance up to 120 minutes on all common partition walls

The + products

Single damper model for all partitions: easy to select
Ergonomic quick reset handle: 2 seconds suffice.
Optional stainless steel pin for harsh environments
Optional remote control box, 0.7 m or 3 m cord
ALDES SecurONE application for damper data collection and sharing
Single mechanism, from the simplest to the highest-spec damper: easy to choose, install and maintain
Easynstall kit for simple installation in lightweight partition
BELIMO 24V connections compatible with ModBus modules
New universal damper
Ergonomic mechanism box: quick reset handle, large electrical connection box.
Conceptor Ventilation software: guaranteed results based on pressure loss calculations for whole system.

Functioning principles

The damper is open in standby position.
It opens when instructed by the FACP or thermal rod and moves into safety position (closed).
Being motorised, it can be reset remotely.

Main features

Certified and compliant with NF S 61937-5 and NF 537
CE marked as per EN 15650: 1812-CPR-1837
Class C airtight properties as per EN 1751 as standard
EI 120 S - 500 Pa on concrete / aerated concrete walls and slabs, type F plasterboard, remote installation on PROMAT / Geostaff
EXAP EN 15882-2:2015, rules X.45 and X.46.
Range from 200x100 mm to 1500x500 mm / 1000x1000 mm
Certified for 300 cycles for auto-controlled dampers, 10,000 cycles for remote-controlled dampers

Technical characteristics

Fully upgradable mechanism
Single damper adaptable to all walls
Lightweight wall installation with post-fitted frame
Reset handle indicating damper position
Wide electrical connection box
Optional stainless steel pin for harsh environments
Easynstall kit for simple installation in lightweight partition
Optional remote control unit
Low pressure loss

Product implementation

Mortar-free installation on lightweight walls, even with post-fitted frame
- Embedded installation on:
- Concrete and aerated concrete wall/slab
- Plaster block wall
- Type A plasterboards (1h) and type F (2h)
Remote installation on PROMAT / GEOSTAF
Positioned on lightweight walls using installation brackets
Easynstall kit for simple mounting of rectangular dampers in type A lightweight partition (60 minutes)
Adapter part for connection to oblong ducting
EXAP EN 15882-2:2015, rules X.45 and X.46: extended opening dimensions
Respect the fire rating reports when installing

References	Free air passage section (dm²)	Insulation material
11043456 - ISONE® 2.1 PM Europe RECT	0,9 (Min) - 43 (Max)
11043457 - ISONE® 2.1 GM Europe RECT	10,3 (Min) - 90,8 (Max)
11043458 - ISONE® 2.1 PM EUROPE RECT -M	0,9 (Min) - 43 (Max)
11043459 - ISONE® 2.1 GM EUROPE RECT -M	10,3 (Min) - 90,8 (Max)

> ISONE® 2.1 PM: 200x100 to 800x600 / 1000x1000 mm > ISONE® 2.1 GM: > 800x600 to 1500x500 / 1000x1000 mm

References	E (mm)	F (mm)	G (mm)	ZA (mm)	ZB (mm)	Lmin x Hmin (mm)	Lmax x Hmax (mm)
11043456 - ISONE® 2.1 PM Europe RECT	25	169	71	Y/2 -122		200 x 100	800 x 600
11043457 - ISONE® 2.1 GM Europe RECT	50	242	99	Y/2 -122	Y/2 -292		1500 x 500 / 1000 x 1000
11043458 - ISONE® 2.1 PM EUROPE RECT -M	25	100	200	Y/2 -122		200 x 100	800 x 600
11043459 - ISONE® 2.1 GM EUROPE RECT -M	50	250	150	Y/2 -122	Y/2 -292		1500 x 500 / 1000 x 1000