Standard roof outlet: STS
Standard roof outlet: STS
The standard roof outlet was designed for CMEV and air handling systems in multi-occupancy residential and commercial buildings.
Standard roof outlet: STS
The standard roof outlet was designed for CMEV and air handling systems in multi-occupancy housing and commercial buildings. It can be used as an air inlet or outlet, and also to evacuate kitchen hood fumes. The STS is available in 9 sizes from diameter 160 to 630 mm and comes in 2 different finishes (slate or tile). The STS standard roof outlet can be used on any type of roof, as it is made airtight with a lead kit.
- galvanised steel compliant with EN 10346 ensuring regularity of the coating.
-
contents of STS:
- rotating rain cowl fitted with a removable bird guard,
- roofing support plate featuring four fastening strips,
- duct connection shaft.
-
2 finishes available:
- slate roof model: smooth anthracite grey paint finish (RAL 7024),
- tile roof model: smooth brick finish (RAL 8012),
-
the metal sleeve used to connect to the ventilation duct is attached to the support plate attached to the roof structure and to the formable lead sheet to make a seal (Ø 160: metal sleeve attached to lead sheet only):
- Ø > 160: remove the rain hood held in place by 2 or 4 screws, Ø 160: remove the rain hood clipped onto the sleeve,
- Ø > 160: fix the support plate on the roof structure using as many of the in-built holes as possible,
- form the lead sheet to seal the fitting while avoiding the crimped edges,
- Ø 160: for a tile roof, create a shim in the direction of the slats to support the lead sheet,
- install the rain hood cover with the air outlet perpendicular to the slope of the roof,
- Ø > 160: refit and securely fasten the 2 or 4 attachment screws and connect the metal sleeve to the ventilation duct.
