Storey manifold (CRE): Standard CRE storey collector Connector

Storey manifold (CRE): Standard CRE storey collector

Connector

The CRE standard storey manifold is used to connect up to four 125 mm diameter ducts to the vertical riser.
Storey manifold (CRE): Standard CRE storey collector
See references
Storey manifold (CRE): Standard CRE storey collector
The CRE sealed storey manifold is used to connect up to four 125 mm diameter ducts to the vertical riser. It ensures leak-free installation without excessive pressure losses on the branch connections. The CRE sealed storey manifold is used with storey elements (2.47 m).
Storey manifold (CRE): Standard CRE storey collector

The + products

  • connector pre-fitted in factory: no risk of leaks,
  • easy to install: the bottom of the CRE slides inside the duct for adjustment.
  • available in diameters from 125 to 630,
  • height:
    • h = 400 mm for Ø ≤ 250,
    • h = 415 mm for Ø ≥ 315.
  • up to four Ø125 branch connections,
  • galvanised steel as per EN 10346 ensuring uniformity of coating,
  • M0 fire certification.
  • easy assembly of interlocking accessories: ducts are female, accessories are male,
  • Final seal requires sealant and/or perforated strip,
  • attached to duct using self-tapping screws (4 to 6 depending on diameter).
Storey manifold (CRE): Standard CRE storey collector Storey manifold (CRE): Standard CRE storey collector

Products and accessories references