Thermally-insulated aluminium ALGAINE
Thermally-insulated aluminium ALGAINE
ALGAINE Alu Insulated can be used to make a thermally-insulated connection between a branch duct and a terminal on all commercial systems.
Thermally-insulated aluminium ALGAINE
ALGAINE Alu Insulated is a flexible, semi-rigid duct comprising two layers of aluminium foil enclosing 25 mm of glass wool insulation. It provides a thermally insulated connection from the branch to the terminal (for heat recovery, air conditioning, forced air heating, etc.) on all commercial systems.
The + products
- flexible duct with built-in thermal insulation,
- compacted duct for transport and storage,
- M0 fire certification for inner layer.
-
material:
- inner: ALGAINE Alu,
- outer: reinforced aluminium foil,
- thermal insulation: 25 mm glass wool,
- packaging: 10 m compacted into 1.25 m,
- bend radius: 0.6 D + 25 mm,
- temperature range: - 30°C to +250°C,
- M0 fire certification for inner layer.
- the duct simply slots onto the branch connector or the plenum ring,
- push the glass wool between the inner and outer layers back in a few cm and stick the two layers together using RAA Alu tape,
- then fit the two joined layers of the duct over the connector and attach using a multi-purpose clamp or CSF wire collar on the Alu tape,
- two lengths are connected together using an RM male connector,
- in all cases, to prevent pressure losses and sound propagations, limit the use of bends to a minimum.