AG 638 series - aluminium
Outdoor grille
AG 638 series - aluminium
Outdoor grille
The AG 638 outdoor wall grille is used for fresh air intake or contaminated air outlet, with no risk of rain ingress due to the form of its vanes.
AG 638 series - aluminium
The AG 638 is a rectangular outdoor wall grille with horizontal vanes at a 45° incline. It offers a rain protection function and bird screen with a 12 x 12 Ø 1.2 mm square mesh.
The + products
- installed directly without adapter,
- can be installed in a dedicated adapter without drilling into masonry.
The AG 638 aluminium rectangular grille enables indoor air to exit the building and outdoor air to enter to renew the indoor air. The form of its vanes prevents rain from entering.
- horizontal vanes at a 45° incline, pitch 40 mm,
- inner part containing galvanised steel 12 x 12 Ø 1.2 mm square mesh as a bird screen,
- anodised aluminium finish, natural satin hue.
- for installation on outside wall.
- direct attachment in masonry or on dedicated adapter,
- the adapter and grille are supplied pre-drilled on the front.
Installation with F1 attachment
-
- Install the grille facing the recess,
- Screw the grille into the masonry using the pre-drilled holes, which depend on the grille dimensions selected
Installation with F2 attachment
-
- Install the grille facing the recess and seal it into the wall. Concealed attachment avoiding the risks of damaging the masonry.
Installation with adapter
-
- Unscrew the grille from the adapter
- Install the adapter
- Use a mortar seal enclosing the pre-cut tabs or screw the adapter into the masonry.
