DESIGN
DESIGN
DESIGN is an extra-flat intermittent extractor. Designed for small to very large rooms (3 connector diameters) with 4 operating modes, including presence detection.
DESIGN
DESIGN is a range of ultra-flat extractor fans providing intermittent ventilation of a space: bathroom, WC, kitchen, utility room, large kitchen etc. (depending on the diameter chosen). The range offers a wide range of operating modes and diameters to meet all your needs.
The + products
- ultra-flat design,
- available with presence detection,
- very quiet: as low as 26 dB(A).
- available with presence detection can be installed in rooms larger than 12 m² with the 150 mm diameter
DESIGN intermittent extractors deliver intermittent ventilation of a space: bathroom, WC, laundry room or large kitchens (depending on the diameter chosen).
4 operating modes:
-
- switch-operated start/stop (version I),
- switch-operated start and adjustable timer-controlled stop (T version)
- activation by detection of humidity level, adjustable timer-controlled stop (H version),
- activation by detection of occupancy, adjustable timer-controlled stop (P version),
-
3 diameters:
- Ø 100 mm for rooms up to 7 m²; bathroom, WC, laundry room,
- Ø 125 mm for rooms from 7 to 12 m²: kitchen, bathroom, WC, laundry room,
- Ø 150 mm for rooms larger than 12 m²: large kitchen and large bathroom
-
3 operating modes:
- Switch-operated start/stop (version I),
- Switch-operated start and adjustable timer-controlled stop (version T),
- activation by detection of humidity level, adjustable timer-controlled stop (H version),
- activation by detection of occupancy, adjustable timer-controlled stop (P version),
- Low-consumption motor with low noise level,
- removable backdraft damper at rear of fan,
- built-in thermal protection,
-
material:
- high quality ABS body,
- decorative ABS cover with aluminium trim (for aluminium finish).
- supplied in a display carton.
- manual operation (version I): instant switch-operated start and stop (switch not supplied),
-
timer-controlled operation with adjustable timer (T version):
- switch-operated start,
- timer-controlled shutdown, adjustable from 2 to 30 minutes.
-
automatic operation with humidity detection (H version):
- activation of boost mode by humidity level, adjustable between 60% and 90%. Activation is automatic if the ambient humidity level exceeds the preset threshold value,
- timer-controlled shutdown adjustable between 2 and 30 minutes. Once the indoor humidity level has returned to below the activation threshold, the extractor operates for the pre-set duration then automatically shuts down.
-
automatic operation with occupancy detection (P version):
- activation by detection of occupancy,
- lens detection distance: 1 to 4 metres,
- lens detection angle: 100°,
- Timer-controlled shutdown, adjustable from 2 to 30 minutes.
- attachment using 4 screws supplied,
- wall or ceiling attachment,
- maximum length of output duct: 2 m,
- manual and timed stop-start operation using a switch,
- fresh air brought into room via air inlet grille or door undercut.
- Text ErP - Ventilation : Complies with eco-design Regulation 1253/2014 and excluded from energy labelling Regulation 1254/2014 as maximum power is below 30 W.