Storey manifold (CRE): Standard CRE storey collector
Connector
Storey manifold (CRE): Standard CRE storey collector
Connector
The CRE standard storey manifold is used to connect up to four 125 mm diameter ducts to the vertical riser.
Storey manifold (CRE): Standard CRE storey collector
The CRE sealed storey manifold is used to connect up to four 125 mm diameter ducts to the vertical riser. It ensures leak-free installation without excessive pressure losses on the branch connections. The CRE sealed storey manifold is used with storey elements (2.47 m).
The + products
- connector pre-fitted in factory: no risk of leaks,
- easy to install: the bottom of the CRE slides inside the duct for adjustment.
- available in diameters from 125 to 630,
-
height:
- h = 400 mm for Ø ≤ 250,
- h = 415 mm for Ø ≥ 315.
- up to four Ø125 branch connections,
- galvanised steel as per EN 10346 ensuring uniformity of coating,
- M0 fire certification.
- easy assembly of interlocking accessories: ducts are female, accessories are male,
- Final seal requires sealant and/or perforated strip,
- attached to duct using self-tapping screws (4 to 6 depending on diameter).