EasyVEC® C4 PRO 400 to 4000
Ventilation box fan
EasyVEC® C4 PRO 400 to 4000
Ventilation box fan
The best-designed range of exhaust box fans on the market, making ventilation efficient, serene, and easy.
EasyVEC® C4 PRO 400 to 4000
EasyVEC® C4 PRO ventilates multi-occupancy residential buildings to ensure correct air quality in dwellings and preserve the building structure. Combined with the T.Flow® Hygro+ / Nano domestic hot water production solution, the heat calories naturally present in air extracted from the dwelling are exchanged and used as a heat source to heat the water.
The Micro-watt constant pressure controller enables significant savings on heating costs compared to a non-regulated (standard) fan unit.
AldesConnect™ Pro can remotely monitor the fan unit for greater responsiveness in handling breakdowns and malfunctions.
The Micro-watt constant pressure controller enables significant savings on heating costs compared to a non-regulated (standard) fan unit.
AldesConnect™ Pro can remotely monitor the fan unit for greater responsiveness in handling breakdowns and malfunctions.
The + products
- wide range from 400 to 4,000 m³/h
- 50% less power consumption than a Standard unit,
- 100% recyclable.
- easy to select: Selector poWair and Conceptor Ventilation design software,
- easy to install: box fans can be dismantled for insertion in small spaces,
- easy to configure: ergonomic and intuitive interface built into box fan,
- easy to service: link to documentation via QR code, single access panel.
EasyVEC® C4 ventilates multi-occupancy residential buildings to ensure correct air quality in dwellings and preserve the building structure.
- Micro-watt control at constant pressure,
-
2 other additional control modes:
- 0-10V input,
- constant speed.
- EC low-consumption motor (50/60Hz),
- backward curve impeller,
- unit made of galvanised steel Z275,
- ergonomic and intuitive interface,
> proximity switch as standard,
- humidity-controlled or pre-configured T.Flow control mode
- compatible with all types of ductwork, even with junctions,
- central system: savings on maintenance,
- alarm relay available by wiring to the PCB,
- Modbus RS485 as standard
-
multiple options and accessories:
- fixed pressure switch 80 Pa for GAS CMEV,
- ducted discharge,
- AldesConnect® Pro.
- made in France.
- certification C4 Ø160,
- compatible with "Bahia” humidity-controlled ventilation technical approval no. 14.5/17-2267,
- ESC-eligible: BAR-TH-127.
-
installation:
- on anti-vibration slab as per DTU 68.3 recommendations,,
- indoor or outdoor location,
- sufficient space must be left in front of the box fan to avoid obstructing the access panel and allow maintenance of internal components.
- for roof installation, preferably positioned out of the wind to limit pressure losses at the outlet.
-
For better acoustic and aeraulic performances, we recommend that you:
- install sound attenuators at the unit connections,
- use the ALDES VIRTUO-FIX range of sealed accessories,
- use MS PRO sealed flexible sleeves to muffle ductwork vibrations.
- Technical Opinion no. : 14.5/17-2267_V3 ; 14.5/16-2185_V2
- Text ErP - Ventilation : Complies with eco-design regulation 1253/2014 and energy labelling regulation 1254/2014 for ventilation. Energy classes:
- Eligibility for EEC : Yes
- ESC data sheet no. 1 : BAR-TH-127
Products and accessories references
Documents
Showing 1 - y of
document
-
Fire resistance rating certificate EasyVEC® C4 PRO/ULTRA/ULTIMATE 400 - 4000Conformities2 MB
-
Product Environmental Profile (PEP) EasyVEC® Pro/Ultra/UltimateConformities1 MB
-
VEX-DFE Manual of safetyManuals242 KB
-
EasyVEC® C4 PRO, ULTRA & ULTIMATE Installation instructionsManuals16 MB
-
EasyVEC® C4 Installation instructions Remote controlManuals661 KB
-
Installation instructions Pressostat Gaz EasyVEC® C4 Micro-watt + 300 - 700Manuals3 MB