Humidity-controlled range

Humidity-controlled air inlets

Aldes humidity-controlled air inlets adapt the incoming airflow to requirements: when the living room is occupied, the sensor braid in the air inlet senses the moisture in the ambient air and opens the inlet. When the room is empty, the air humidity level drops again and the inlet closes slightly to reduce the volume of incoming air and reduce the need for heating.
The sleek design of Aldes humidity-controlled air inlets, the range of colours, and the airflow orientation to the ceiling make them a comfortable and very discreet product for occupants (they can also be installed inside roller shutter boxes - EHC range).

  • Aldes humidity-controlled AIR grilles adapt the incoming airflow to requirements:

    • When the living room is occupied, the sensor braid in the air inlet senses the moisture in the ambient air and opens the inlet,

    When the room is empty, the air humidity level drops again and the inlet closes slightly to reduce the volume of incoming air and reduce the need for heating.

Discover the range

Humidity-controlled range
    Humidity-controlled systems control the air renewal rate according to the humidity level in rooms, depending on building occupation and therefore on occupant requirements.

    HYGRO A: humidity-controlled extract terminals and fixed or self-balanced air inlets. 
  • Technical Approval 14.5/17-2266 & 14.5/17-2267,
  • Type of heating: electricity, gas (vented boiler) or other independent from the CMEV system, or air conditioning / heating by split unit and/or ducted T.One unit.

    • HYGRO B: humidity-controlled extract terminals and air inlets. The airflow is better distributed according to the occupancy level of each room.
  • Technical Approval 14.5/17-2266 & 14.5/17-2267,
  • Type of heating: electricity, gas (vented boiler) or other independent from the CMEV system, or air conditioning / heating by or ducted T.One unit.

    • HYGRO GAS: gas extract terminals and fixed or self-balanced air inlets. 
  • HYGRO A GAS: studios to 2-bed dwellings,
  • HYGRO B GAS: from 3-bed to 5-bed and more,
  • Technical Approval 14.5/17-2266 & 14.5/17-2267,
  • Type of heating: boiler connected to the CMEV system.
  • Humidity-Controlled Mechanical Ventilation System,
  • Multi-occupancy housing, Individual houses, Hotels
  • New builds and refurbishment.
  • Sleek and modern design,
  • Wide range of colours
  • Airflow oriented to ceiling for greater comfort
    AIR MANAGEMENT REQUIREMENTS
  • Aldes holds Technical Approvals for its Residential systems (14.5/17-2266 & 14.5/17-2267) and Hospitality systems (14.5/16-2185). The air inlets must be installed in accordance with the air handling sizing tables.
  • In the sizing tables, EH corresponds to EHL, EHB², EHC or EHT².
  • Air inlet module corresponds to the module (m³/h) at 20 Pa: fixed or self-balanced air inlet.
  • The air inlet base is screwed onto the interior side of the mortise then the air inlet is simply slotted on to it,
  • Outdoors, the cover is screwed into the exterior mortise.